Nine participants from Russian ASCON, Fidesys, LEDAS, and TopSystems will attend COFES 2013 in Arizona

The number of COFES participants from Russia and CIS is constantly increasing. Vladimir Malukh from LEDAS-isicad was the first Russian expert who in 2009 visited COFES when the event was hardly known in Russia and the CIS; see Vladimir's isicad paper "COFES – Wish you were here".  

Awareness of COFES drastically increased in Russia and the CIS when in fall 2010 Cyon Research together with LEDAS organized a COFES-isicad event in Moscow with a keynote and general active participation of Brad Holtz.  

In 2011, a list of COFES participants included five persons from Russian companies: three - from ASCON, one - from a multi-vendor reseller Consistent Software, and Dmitry Ushakov, who at that time was LEDAS CEO; see Dmitry's isicad paper "Get back! (Personal Impressions from COFES-2011)".

Active participation of ASCON in 2011 was not casual. The company is the largest Russian CAD and PLM vendor with a well-developed MCAD KOMPAS 3D and intensively extending PLM set; it successfully competes with Autodesk in the Russian & CIS market. In 2010-2011 ASCON began to internationalize its marketing and partnership activity as well as to invest into development of SaaS, mobility, and other hot trends. It is at COFES 2011 where the managers of ASCON established close partnerships for example with Lightwork: see my interview with Clive Davies: “ASCON is proving to be the ideal partner for Lightwork Design“.  This direction of ASCON’s development continued quite successfully which is illustrated, for example, in some isicad-papers such as «ASCON Releases DEXMA as a Competitor to PLM 360» , «ASCON’s Mobilezation: My impressions from the “White Nights” Forum», and other.

In 2012, ASCON again sent its three managers to COFES, and now – in 2013, CEO Maxim Bogdanov will attend Arizona for the third time, now accompanied by Sergey Evsikov, Vice-President, Sales (left) and Alexander Golikov, Founder (right):

Currently, ASCON feels like a mature international actor. The company is providing technical assistance to COFES Russia 2013  to be held in St. Petersburg six weeks after the event in Arizona. Today, ASCON is emphasizing its openly distributed original geometric kernel C3D  – the foundation of KOMPAS 3D, its above mentioned cloud PLM DEXMA, and its traditional-style large PLM+ERP environment.      

In 2012, COFES invited six persons from Russia and the CIS. Along with the people from ASCON, there were Dmitry Kondakov from IRISOFT (a large Russian VAR of PTC and some other vendors), Alexander Bausk from Ukrainian Nuclear Structures Research Lab, and Alexey Ershov, LEDAS CEO – see his isicad paper ”Arizona Dream: A detailed informal report on COFES-2012”.

Now about COFES 2013 which starts approximately in 4 weeks. You can meet there a record number of persons from Russia (seven). Two guys from ASCON were already mentioned above.

Another participant is Vladimir A. Levin,  ScD, professor, Moscow State University, department of Mechanics and Mathematics, Computational Mechanics. 

Vladimir’s main field of interest is developing mathematical models of strength analysis of bodies under finite strains. Total number of publications: over 235, including 4 monographs. Vladimir is the founder and the head of Fidesys – a start-up which positions itself as a provider of a new generation CAE system for strengthen analysis and associated problems. 


After my blogpost was published, Anatoly Vershinin, Fidesys CTO, joined Vladimir in his visit to Arizona. 

There will be three persons from Top Systems: CEO Sergey Kuraksin, CTO Sergey Kozlov, and Sergey Bikulov, executive director (from left to right):.

Top Systems's set of traditional CAD+PLM+ERP solutions is quite well developed and  recognized in the Russia / CIS market. The key product of Top Systems, its MCAD called T-FLEX, is characterized as one of the most developed parametric system in the world market: see a detailed paper by S.Kuraksin and S.Kozlov “The Power of T-FLEX CAD Parametric Modeling”: Part I and Part II. Interestingly a paper which compared  T-FLEX and SolidWorks (the comparison made by a Top Systems’ partner in Poland) has become and until now is the most visited isicad publication since launching the portal.

It is important to mention that Top Systems is actively involved (both in management and development ) into the building of a new geometric 3D modeler RGK within a big project funded by the Russian Government and being implemented by a distributed team from several development centers of Russia. I believe that today, by visiting COFES, Top Systems is making an active step towards international market.

This time, LEDAS will be represented by the company’s COO Nikolay Snytnikov – PhD, who despite his young age (30) has already passed through a hard many-year school of participation in a cool outsourcing project for Dassault Systems (as a developer and manager), and currently he is a manager of the LEDAS part of RGK - the Russian Geometric Kernel. Within RGK, LEDAS is responsible for the development  of Boolean operations,  fast NURBS library,  some parallelization tasks, and other hard problems (see “LEDAS Experts: How our Company is Involved in Developing Russian Geometric Kernel” by A.Ershov and N.Snytnikov). Nikolay's background is in parallel computing so his visit to NVIDIA GPU Technology Conference 2012 resulted not only in a series of best-read isicad reportages but seems to bring useful knowledge to the RGK project. Since LEDAS does not compete with any CAD vendor, the company is a partner of both Top Systems and ASCON; the latter has used LEDAS service to integrate direct modeling facilities into KOMPAS 3D and is now relying on  LEDAS support in distribution and commercialization of the C3D kernel.   

As an internationally recognized provider of components (such as geometric solvers, direct modeling modules, and other) and highly-qualified software development services, LEDAS is well-known to the global market. After selling its IP to Bricsys in 2011, LEDAS has been  focusing on services, and recently the company shareholders have established an US business entity to better serve its clients worldwide. On the other hand, competence, skills, experience, and creativity enabled LEDAS experts to formulate a number of new project/technology ideas related to some hot topics of engineering software such as interoperability, etc. Nikolay Snytnikov is going to Arizona to strengthen some existing contacts, to seek for the new service contracts, and to look for the partners interested in joint business projects. As a member of the editorial board and a fruitful writer for isicad.ru, Nilolay will also send us his reports from the Arizona event.

Just published at isicad.net: The Power of T-FLEX CAD Parametric Modeling. Part I - with 30 video clips

isicad.net has just published "The Power of T-FLEX CAD Parametric Modeling. Part I"  by CEO and CTO of Top Systems, a leading Russian privately held CAD/PLM company which this summer celebrated its 20^th anniversary. The company is known first of all by its well-developed parametric MCAD system T-FLEX, which is quite popular in Russia and CIS and, probably, when supported by a powerful marketing, could become popular globally. You can find some characteristics of T-FLEX in “T-FLEX Parametric CAD” by Deelip Menezes , “The Russian MCAD Market” by Ralph Grabowski, and in multiple publications of isicad.net – such as for example  “T-FLEX CAD 12 Released”.
  

Experts and developers of Top Systems has accumulated a huge competence and experience in engineering software, and nobody was surprised to learn at the beginning of 2012 that Top Systems became one of the key contractors of the Russian Geometric Kernel project.

Top Systems has step by step built a full scale PLM environment – also integrated with a number of ERP-modules. Some intermediate results of this direction were presented at seminar COFES-Russia/isicad-2010. I hope that attendees of the planned COFES-Russia/isicad-2013 will be able to learn much about the latest PLM-results of Top Systems – called PLM+.

Interesting to mention that couple days ago, I wrote in @levin_david: “Today the isicad.ru article (from May 21) which compares SolidWorks vs Russian T-FLEX received a comment No.1000  http://bit.ly/OvjgOQ“.  I believe that Top Systems has not yet realized its full potential and hopefully this richly illustrated paper will increase global awareness of the company, its solutions, and competence.  

Part II soon to appear. 

CAD/PLM in June: How I Saw It From Russia Or Within the Country. Part I: Top Systems and Siemens PLM

You may consider this post as a June part of an overview which almost quarterly I try to compose at isicad.net (see for example this). On the other hand, this post is to some extent an overview of my Russian posts of June. This combination has a contradiction since in the English isicad.net overviews I aim to present some key issues of the Russian market while my Russian blog of course includes some comments on events of the global market. Besides, my Russian posts usually include a lot of Russian cultural context which I am absolutely not able to transform into English…

1. At the beginning of June, Top Systems, the second (after ASCON) Russian CAD/PLM company known first of all by its powerful Parasolid-based  MCAD T-FLEX, held its big annual conference. At the conference the company announced “PLM+” characterized as follows:  «Its fundamental distinction from traditional PLM solutions is an essential extension of integrated software environment which now covers not only tasks of life-cycle but all its accompanying processes».  (For the first time this PLM+ was briefly mentioned by Top System CEO Sergei Kuraksin at COFES-Russia-2010 seminar in Moscow). In one of my June posts  I asked Sergei “What traditional PLM solutions he means, maybe those of DS, Siemens, PTC, ARAS or even Autodesk? What are the tasks not covered by traditional PLM that are solved by PLM+? Are there any tasks solved by traditional PLM and not solved by PLM+ based on T-FLEX?...”  

My conclusion was that although Top Systems do not follow modern trends of mobility, social networking, SaaS, and other, the company can probably succeed with some big Russian enterprises, say from defense domain, that are traditionally more conservative. (Note, that Top Systems has quite a good customer base since the company basic solutions are actually effective, however until recent time, marketing of Top Systems was rather rudimentary). Finally, I wrote that such gigantomania may be a result of some inferiority complex, and, building PLM+ may help in its satisfaction:). Later, in the comment section of my post, we had with Sergei a nice discussion, and soon Top Systems has published an article which made their PLM+ concept more clear, it looks like that PLM+ is PLM+ERP (you can conclude this from the TLAs seen at the picture below).

My above mentioned post has a title “Prompt Psycho(analysis) of Some Recent CAD Publications”. Along with Top Systems, I touched there Siemens PLM and PTC. 

2. With an objective to give Russian readers my impression about «Global Launch Solid Edge ST4» I retold and commented couple posts of Roopinder Tara. I am not going to retell them for you. One small terminology nuance attracted my attention: Tony Affuso speaks not about necessity to work more with SME but with midstream enterprises. Is small not a word from Siemens PLM lexicon? At least subconsciously?  

My own opinion about Solid Edge and its future:

- ST is a successful pioneer of Direct Modeling which will inevitably win the future of MCAD (we at LEDAS are confident about this not only from publications but from our own projects),

-Solid Edge is definitely a very good system (it’s a pity that Siemens never agreed to give LEDAS trial versions or so: was this because of the  competition between D-Cubed and LGS),

- I estimate the probability for Solid Edge  to rise from its current (3rd?) to 1st or 2dn place (today kept by SW and Inventor) or even to approach them as much as 5% - practically independent of SPLM marketing efforts,

- However  we can rather probably soon hear about something like hundreds if not thousand installations of Solid Edge to one or other “Daimler-Benz”:),  

- 5% of positive probability I give to the scenarios such as «DS actually kills SW» or/and  «Autodesk makes something crazy with Inventor »:).

BTW, I am pleased to mention a remarkable and very large interview with Chuck Grindstaff, President and CTO of Siemens PLM Software taken by Alexandra Sukhanova, executive editor of the Russian language magazine “CAD/CAM/CAE Observer” published in Riga, Latvia.

Just look at the great gallery of interviews taken by Alexandra during last several years). It would be strange to retell here the interview with Chuck called “The revolution in CAD/PLM should not lead to discontinuity of innovation process”), I can only mention that he perfectly combines his CTO role (characteristics of SPLM solutions) and that of the President (characteristics of competitors and comparison of SPM with them). It looks like he is strict and biased to DS (main and dangerous competitor?), demonstrates  indulgence to PTC (not main competitor?), and does not take seriously Autodesk (not a competitor at all in SPLM key business?)… Alexandra kindly permitted me to re-publish this interview at isicad.ru, and I hope we will see an interesting discussion.  

See Part II: PTC, ASCON and Autodesk